Filament Wire

Showing all 10 results

Fully Insulated Wire – FIW

ZERO-DEFECT ENAMELLED ROUND COPPER WIRE

High thermal class and high voltage resistance

Fully insulated wire (FIW) zero-defect enameled round copper wire with high thermal class, zero-defect strengthened insulation and high voltage resistance compliance with IEC 60317-56 / IEC 60950 and NEMA MW85-C. The wire can meet the requirements of miniaturized components, good winding performance and low cost, ideal for compact transformers and electronic switches.

Next Generation Insulated Wire – QIW

INTEGRATE POLYIMIDE FILM AND WIDE RANGE OF CODUCTOR CHOICES

The best performance of reinforced insulation

QIW series is integrating polyimide film and wide range of conductor choices, to deliver the next generation reinforced insulated wire. It has UL and VDE approvals, as well as complying UL 60601 for medical equipment. Thermal class is covering Class B, F, H, and it’s available in round and profiled type.

THL-B series

VERY HIGH DIELECTRIC STRENGTH AND BREAKDOWN VOLTAGE

THL-B series, thermal class at 130°C, is a unique product for high frequency transformers. Three layer extruded coatings of high performance polymer resins gives excellent dielectric properties to this type of winding wires. Unlike enameled wires, three layers of insulation are extruded over the copper conductor with automated manufacturing process, to ensure perfect central position of conductor.

The conventional enameled wire winding coils requires insulation between the primary and secondary coils by means of barrier tape or interlayer tape to isolate primary and secondary windings. Since three layers coating is having very high dielectric strength, it has very less creepage factor. This positive feature of THL serves to downsize switching transformers and promises high production efficiency and cost reduction. Depending on the design, the transformer size can be reduced up to 40% and weight up to 60% as compared to transformers made of enameled wires.

THL-F series

VERY HIGH DIELECTRIC STRENGTH AND BREAKDOWN VOLTAGE

THL-F series, thermal class at 155°C, is a unique product for high frequency transformers. Three layer extruded coatings of high performance polymer resins gives excellent dielectric properties to this type of winding wires. Unlike enameled wires, three layers of insulation are extruded over the copper conductor with automated manufacturing process, to ensure perfect central position of conductor.

The conventional enameled wire winding coils requires insulation between the primary and secondary coils by means of barrier tape or interlayer tape to isolate primary and secondary windings. Since three layers coating is having very high dielectric strength, it has very less creepage factor. This positive feature of THL serves to downsize switching transformers and promises high production efficiency and cost reduction. Depending on the design, the transformer size can be reduced up to 40% and weight up to 60% as compared to transformers made of enameled wires.

THL-H series

VERY HIGH DIELECTRIC STRENGTH AND BREAKDOWN VOLTAGE

THL-H series, thermal class at 180°C, is a unique product for high frequency transformers. Three layer extruded coatings of high performance polymer resins gives excellent dielectric properties to this type of winding wires. Unlike enameled wires, three layers of insulation are extruded over the copper conductor with automated manufacturing process, to ensure perfect central position of conductor.

The conventional enameled wire winding coils requires insulation between the primary and secondary coils by means of barrier tape or interlayer tape to isolate primary and secondary windings. Since three layers coating is having very high dielectric strength, it has very less creepage factor. This positive feature of THL serves to downsize switching transformers and promises high production efficiency and cost reduction. Depending on the design, the transformer size can be reduced up to 40% and weight up to 60% as compared to transformers made of enameled wires.

Tin-plated Wire

ROBUST PROTECTION AGAINST CORROSION AND OXIDATION

Corrosion resistance and easy to solder

Tin-plated wire is an uninsulated wire that is coated by a layer of tin. Bare copper wire is prone to oxidation over time compared with tin-plated wire. The tin coating protects wire from oxidation in humid and rainy conditions, and high heat environments. Tin-plated wire will be ideal in environments with long-term exposure to excess moisture to prolong the lifespan of copper conductors.

Triple Insulated Wire

VERY HIGH DIELECTRIC STRENGTH AND BREAKDOWN VOLTAGE

THL-B series

THL-B series, thermal class at 130°C, is a unique product for high frequency transformers. Three layer extruded coatings of high performance polymer resins gives excellent dielectric properties to this type of winding wires. Unlike enameled wires, three layers of insulation are extruded over the copper conductor with automated manufacturing process, to ensure perfect central position of conductor.

The conventional enameled wire winding coils requires insulation between the primary and secondary coils by means of barrier tape or interlayer tape to isolate primary and secondary windings. Since three layers coating is having very high dielectric strength, it has very less creepage factor. This positive feature of THL serves to downsize switching transformers and promises high production efficiency and cost reduction. Depending on the design, the transformer size can be reduced up to 40% and weight up to 60% as compared to transformers made of enameled wires.

Triple Insulated Wire THL-F series

VERY HIGH DIELECTRIC STRENGTH AND BREAKDOWN VOLTAGE

THL-F series

THL-F series, thermal class at 155°C, is a unique product for high frequency transformers. Three layer extruded coatings of high performance polymer resins gives excellent dielectric properties to this type of winding wires. Unlike enameled wires, three layers of insulation are extruded over the copper conductor with automated manufacturing process, to ensure perfect central position of conductor.

The conventional enameled wire winding coils requires insulation between the primary and secondary coils by means of barrier tape or interlayer tape to isolate primary and secondary windings. Since three layers coating is having very high dielectric strength, it has very less creepage factor. This positive feature of THL serves to downsize switching transformers and promises high production efficiency and cost reduction. Depending on the design, the transformer size can be reduced up to 40% and weight up to 60% as compared to transformers made of enameled wires.

Triple Insulated Wire THL-H series

VERY HIGH DIELECTRIC STRENGTH AND BREAKDOWN VOLTAGE

THL-H series

THL-H series, thermal class at 180°C, is a unique product for high frequency transformers. Three layer extruded coatings of high performance polymer resins gives excellent dielectric properties to this type of winding wires. Unlike enameled wires, three layers of insulation are extruded over the copper conductor with automated manufacturing process, to ensure perfect central position of conductor.

The conventional enameled wire winding coils requires insulation between the primary and secondary coils by means of barrier tape or interlayer tape to isolate primary and secondary windings. Since three layers coating is having very high dielectric strength, it has very less creepage factor. This positive feature of THL serves to downsize switching transformers and promises high production efficiency and cost reduction. Depending on the design, the transformer size can be reduced up to 40% and weight up to 60% as compared to transformers made of enameled wires.